24
GT ULTRA ZERO AIR GENERATOR
USER MANUAL
www.vicidbs.com
Version 1.03.0000
8.2.3 Three Year Catalyst Chamber Filter Replacement
The catalyst chamber used in the GT Ultra Zero Air generator should be replaced every three years to
maintain carbon monoxide and hydrocarbon specifications. The system should be shut down as described
above prior to replacement. Allow the unit to cool down for a minimum of two hours before replacement.
• If unit has been powered recently and catalyst is hot, turn off the power.
DO NOT turn off the air at
this time.
•
Remove the outlet connection and allow the outlet air to flow freely for two hours to cool the catalyst.
After two hours of cool-down, disconnect the air supply. Depressurize the system by depressing the pin
at the bottom of the inlet filter housing.
• Open front panel with door key.
• Unscrew screws (1) and (2) and remove the right side plastic cover by removing screws (3).
2
3
1
