31
• Image Appearance
This provides access to the advanced image settings for the network camera.
– Brightness:
The image’s brightness can be adjusted in the range 1 ~ 10, where a higher
value produces a brighter image.
– Saturation:
Set an appropriate value in the range 1 ~ 10. Lower values mean less color
saturation.
– Sharpness:
Set the amount of sharpening applied to the image. A sharper image might
increase image noise especially in low light conditions. A lower setting reduces image
noise, but the image would be less sharp.
– White Balance Mode:
Select white balance mode which fits camera installation
environment. In case of Manual mode, user can set R, G, B gain manually.
• Enhance Control
– Enable high light compensation:
Activates HLC function.
– Enable backlight compensation:
Activates BLC, which cannot be used with WDR
function.
– Enable wide dynamic range:
Activates WDR, which cannot be used with BLC or Defog
function.
– Enable flip horizontal:
Check this box to flip the image.
– Enable noise reduction:
Check this box to activate the noise reduction.
Once enabled, you can select noise reduction level.
– Enable defog:
Check this box to activate the Defog function.
– Enable digital image stabilization:
Check this box to activate the DIS function.
– Enable digital zoom:
Check this box to activate the digital zoom function.
Summary of Contents for Cruiser SN673V-C
Page 2: ......
Page 86: ...85 3 7 About Learn information about your system from the About screen ...
Page 92: ......