59
2) Tour
There are 8 programmable Tours. Each Tour consists of up to 64 Presets.
• Tour Setting:
– Tour Number:
The Tour number can be selected in the range 1 ~ 8.
– Title:
Up to 12 characters (Alphanumeric characters and space)
– Repeat:
Select number of repetition from Continuous to 90. The default is Continuous.
– Sequence:
Select either forward or backward sequence in the Tour position list.
– Delete Tour:
Delete the stored Tour Position Setup list of Tour number.
– Tour Position Setup:
Open or close the Tour Position Setup as below.
• Tour Position Setup:
– Tour position:
The Tour position can be selected in the range 1 ~ 64.
– Preset number:
Show the selected Preset number.
– Dwell Time:
Select the Dwell Time from 0 to 99 seconds. The default is 10 seconds.
– Speed:
Adjust Pan/Tilt/Zoom Speed if you want to a slow movement. The defaults are
maximum Speed.
– Delete Position:
If you want to remove Tour position from Tour Position Setup list, select the
desired Tour Position, and click the Delete Position button.
– Set Position:
Click the Set Position button, then show the stored Presets on drop-down list.
Follow steps below to program the Tours:
1. Click the desired Tour position of Tour Position Setup list, and click Set Position button, then
show the saved Presets on drop-down list. Click a Preset.
2. Repeat step 1 for each desired position.
3. Click the
Save
button to save the settings, or click the
Reset
button to clear all of the
information you entered without saving it.
Summary of Contents for Cruiser SN673V-C
Page 2: ......
Page 86: ...85 3 7 About Learn information about your system from the About screen ...
Page 92: ......
