XX185-30 Rev 807 Kollector Lite
Configuring the ViconNet System
•
141
12. The
Alarm Setup Wizard
window is displayed, where you define the time schedule for the macro.
13. (Optional) To cause the system to activate the macro
only
if the alarm conditions are met during a
specific time range on specific days (for example, during non-working hours on weekdays), define the
time period in the
Alarm Activity Time
area, as follows:
Option Description
Active From/To
Select the start and end time for the time period (in HH:MM:SS format) by:
•
Selecting the required time segment and then using the up/down arrows to scroll to
the required value,
•
-OR-
•
Selecting the required time segment and using the keyboard to type in a numerical
value.
Sun, Mon, Tue,
Wed, Thu, Fri, Sat
Select the days of the week for the time period.
NOTE:
The default is 7 days a week, 24 hours a day (from midnight to
midnight).
Minimum time
between alarms
Select how much time must pass after the first and subsequent alarms before a new alarm
will be generated (for any specific camera).
