XX195-30 Rev 807 Kollector Lite
Setting Up a VPN Service
•
271
Step 4: Setting Up the VPN Network
Follow the procedure here to setup the ViconNet application over a VPN network.
To set up the VPN Network:
1. Set one of the Kollector Elites in the internal network to be the master Nucleus, as shown in
Chapter 3,
Configuring the ViconNet System
.
2. Make sure to select the VPN adapter in the current network configuration settings selected in
Step 1
.
3. Run the VPN client and enter the username and password you set previously into the appropriate fields,
as required.
4. Click
to connect to the VPN server and make sure the application is established.
5. Start the ViconNet application on the Workstation and set the Nucleus IP address to that defined in
Step 1
.
6. In
the
Site List
, make sure you can see the cameras over the network and that the list is updated.
