XX150-06-00 Rev 1010 Roughneck V926 Fixed-Position Camera Dome Installation
•
13
Sync
Synchronization type, INTERNAL or AUTO (Line Lock), for the camera is selected from this menu.
Sync Mode
Select the synchronization, INTERNAL (default) or AUTO, which is line locked to prevent picture roll when
switching between cameras in multiple camera installations.
V-Phase
If synchronization is line lock, the V-PHASE is selectable from 0 to 299.
Setup
The Setup menus provide for configuration of the Camera ID, Title display, DPC (Dead Pixel Cancellation),
Monitor type, Language of the display, Baud Rate and Omni Lens.
Camera ID
Set up a unique camera identifier. The camera ID is a user selectable title for the camera that is up to 16
characters (default is 0).
Title
The camera title ID display can be turned ON or OFF (default). If turned ON, the title can be edited using the
joystick, reset to clear the title, and positioned on the screen.
DPC
Dead Pixel Cancellation can be set to OFF (default) or AUTO. When this is used, the camera will automatically
remove defective pixels from an image and “fill in” the image. Select the White and Black Threshold from 0-255;
the DPC Level can be adjusted for an overall setting.
Monitor
Select monitor mode, CRT (default) or LCD.
Language
Select language from ENGLISH (default) or KOREAN.
Baud Rate
Select the data communication speed from 2400, 4800, 9600 (default), 14400, 19200 or 38400.
Omni Lens
This camera does not support the Omni lens at this time.
Summary of Contents for Roughneck V926-C26
Page 2: ......
