XX163-11-00 Rev 1006 SVFT-PRS Pressurized Dome Housing
Installation
•
23
ViconNet Configuration
After the camera dome has been setup with the proper IP address, configuration features from a remote
workstation, server or recorder are available as follows.
•
A network settings screen is used to modify the camera dome’s IP parameters. This allows great
flexibility in network setup.
Note: This setup can be performed from any VN1000V3/VN-NVR workstation connected to the IP dome and
to the Nucleus or from a Kollector Elite.
1.
Verify that the camera is connected to the network, that it is active and that it is configured to use the
same
Nucleus.
2.
From the workstation desktop, run the ViconNet application.
3.
After logging in, open the site setup selection window.
4.
Select the IP dome camera setup.
5. Open
the
Network Setup and Site Name
setup window.
Network Settings
window will display.
See Figure below.
6.
Change the required parameters and click OK. (See your IT administrator for specific network
parameters.)
Application
of the camera will restart.
Network Settings Window
•
An Authorization screen is used to establish authority levels, by user group. Functions such as PTZ
and video view, record and playback can be set for authority level.
•
A priority screen is used to establish video quality and FPS levels.
Summary of Contents for SVFT-PRS22E
Page 2: ......
Page 16: ...10 Installation XX163 11 00 Rev 1006 SVFT PRS Pressurized Dome Housing...
Page 31: ......
