XX074-02-01 Rev 703 Variable-Speed Keypad
Operation
•
11
9
9
9
9
Adding All Cameras
Press
Press
SEQ
Press
1
Press & Hold
PROG
Release
PROG
9
9
9
9
Deleting All Cameras
Press
Press
SEQ
Press
2
Press & Hold
Perform these steps if you
are not already in Mode 2.
PROG
Release
PROG
Using the Joystick
Panning and Tilting
Use the joystick.
Deflect the joystick
farther in the
desired direction to
increase speed.
Autopanning
Note: Manual pan operations
have priority over the autopan
function. Panning during
autopanning will deactivate
autopanning.
Toggle the
A/P button to
start or stop
autopanning.
A/P
Zooming with the Joystick
V1411J-DVC Only:
Twist clockwise for Zoom In.
Twist counterclockwise for
Zoom Out.
Setting Autopan Speed Control
Note: This procedure is for Surveyor series domes only using 1300 speed control type.
Note: For receivers other than the Surveyor series domes, use the procedure below to set the autopan speed.
Deflect the joystick to the desired
position. This position determines
the speed (the farther away from
center, the faster the speed).
During autopanning, press
A/P up to four times to step
through available speeds.
Press & Hold
A/P
A/P
To stop autopanning,
press the A/P key a
fifth time.
Use the joystick
to manually pan
or tilt.
A/P
A/P
Release
Release
then...
OR
Changing the Joystick Speed
Press to toggle between
the maximum joystick
speed and 1/4th of the
maximum speed. This
allows you to easily track
a slow moving object.
P/T
SPEED
Press
