A. Normal upright mounting
B. Upright mounting when
than 10 degree up angle is required.
C. Normal inverted mounting
A N G L E
D. Inverted mounting when greater than 10 degree up angle is required
Figure 3
Scanner and Camera Mounting Positions
SHIPPING INSTRUCTIONS
If a unit must be returned to the factory, follow these direc-
tions:
Call or write Vicon for Return Authorization (R.A.) at one
of the following locations:
VICON INDUSTRIES INC.
525 Broad Hollow Road
Melville, New York 11747
VICON INDUSTRIES INC.
Central Regional Office
400 Bonnie Brae Street
River Forest, Illinois 60305
VICON INDUSTRIES INC.
Western Regional Office
950 West Central Ave. Unit C
Brea, California 92621
1832
or 1833
VICON INDUSTRIES (U.K.) LTD
R o a d
Hilsea. Portsmouth
Hampshire PO3
England
(0705) 665312
VICON INDUSTRIES INC.
Southeastern Regional Office
3010 Business Park Dr., Ste. B
(Atlanta)
Georgia 30071
You must have an
number to send a unit to Vicon
2. On a sheet of paper to be sent with the unit write your
company’s name and address and the name of the
person who issued the
number.
3. Give the Vicon R.A. number. This number MUST appear
on any correspondence concerning the unit being
shipped.
4. Give a brief description of the
5. Fully describe the problem and the circumstances under
which it occurs.
6. If the unit is still covered by the warranty, indicate the
unit’s original date of purchase.
7. Attach all the above information to the unit.
8. Pack the unit carefully, using the original shipping carton
or its equivalent for maximum protection.
9. Mark the R.A. number on the outside of the carton, pre-
ferably on the shipping label.
Refer to the Vicon Dealer Price List for complete warranty
information.
X328-885
