16
3.
Select a scene and then click
to set it as the default scene.
4.
If auto-switching is enabled, the camera can switch to the scene automatically when the condition for
switching to a non-default scene is met. Otherwise, the camera remains in the default scene. When auto-
switching is not enabled, the camera remains in the current scene.
NOTE!
If Auto Switching is enabled (scene settings will be unavailable), the device will switch between the
set scenes. If not, the device will stay at the current scene. The device will stay at default scenes
unless the non-default scenes are triggered.
If multiple non-default scenes are triggered, then the device will switch to the scene with the
minimum number (starts from 1 to 5).
Image Enhancement
1.
Click Setup > Image > Image and then click Image Enhancement.
2.
Use the sliders to change the settings. You may also enter values directly. The following table describes
some major parameters.
Item
Description
Brightness
Set the degree of brightness of images.
Low brightness
High brightness
Saturation
The amount of a hue contained in a color.
Low saturation
High saturation
