71
2.3.7
Audio (Audio Mode and Bit Rate Settings)
The Audio Mode setting can be found under this path:
Streaming> Audio
.
In the Audio page, the administrator can select one transmission mode and
audio bit rate.
Transmission Mode
Full-duplex (Talk and Listen simultaneously)
In the Full-duplex mode, the local and remote sites can communicate
with each other simultaneously, i.e. both sites can speak and be heard
at the same time.
Half-duplex (Talk or Listen, not at the same time)
In the Half-duplex mode, the local/remote site can only either talk or
listen to the other site at one time.
Simplex (Talk only)
In the Talk only Simplex mode, the local/remote site can only talk to the
other site.
NOTE:
This function is not available for Compact Fixed Dome.
Simplex (Listen only)
In the Listen only Simplex mode, the local/remote site can only listen to
the other site.
Disable
Select the item to turn off the audio transmission function.
Server Gain Setting
Set the audio input/output gain levels for sound amplification. The audio input
gain value is adjustable from 1 to 10. The audio output gain value is adjustable
from 1 to 6. The sound will be turned off if the audio gain is set t
o “Mute.”
Input Type (Fisheye IP Camera Only)
Set the audio input type. The audio input types are <Line in> and <Microphone>.
If <Microphone> is selected, the audio input will be from the built-in microphone
of the camera. If <Line in> is selected, the audio input will be from the audio
device connected via the Audio In/Out connecters.
