82
2.4.9
Fisheye Correction (Fisheye IP Camera Only)
The Fisheye Correction setting can be found under this path:
Camera> Fisheye
Setting
.
At this setting page, users can choose a dewarping method for correcting the
fisheye source images and select the camera’s installation method to view the
dewarped images with the correct viewing modes. Refer to the following
sub-sections
Fisheye Dewarping Type
and
Installation
for more details.
After a suitable dewarping method and the correct installation method are
selected, users can view the dewarped images from the camera’s web browser
configuration interface. Click on the Fisheye Image Adjustment buttons on the
home page and view the dewarped images in the preferred viewing mode.
Alternatively, users can view the dewarped images from a backend device or
backend software that has dewarping function. Refer to the
User’s Manual for
more details.
NOTE:
The Fisheye Image Adjustment buttons are different depending
on the dewarping method and installation method selected at this setting
page. Refer to the tables at sub-section
Fisheye Image Adjustment
under section
Function Items on Home Page
for the supported buttons.