87
2.5
Pan/Tilt
Under the tab <
Pan Tilt
>, there are submenus including: <Preset>,
<Sequence> and <Pan/Tilt Control>.
NOTE:
Pan/Tilt function is only available for Zoom AF Box Camera and
Box Camera (DC12V/AC24V/PoE Model).
With RS-485 support, the camera is capable of working with a Pan/Tilt Head for
pan and tilt control. Before implementing pan/tilt control, please ensure the
Pan/
Tilt Head is correctly connected to the camera’s RS-485 port.
Pin Definition for IP Camera’s RS-485 Port
6. D -
7. D +
2.5.1 Preset
The Preset setting can be found under this path:
Pan Tilt> Preset
.
NOTE:
Before setting this function, users must enable the Pan/Tilt
Control first. Refer to section
Pan/Tilt Control
for more details.
There are up to 256 preset points that can be set in the Preset setup page.
Please follow the steps below to set and run preset points.
Preset Points Setup
Step 1.
Move the camera to the desired position by moving the mouse cursor
onto the screen, left click on mouse once, and then drag the red arrow
to pan/tilt. Users may adjust the zoom position as well.
Step 2.
Once a Preset Point is defined, assign a number (between 1 and 256)
and enter it into the input field.
Step 3.
Click on the <
√
> button to save the defined preset point.
