FEATURES AND FUNCTIONS
REAR VIEW
WARNING:
The included power cord is used for
Never connect to any outlet or power supply having a different voltage or frequency.
.
Ensure the power cord is not plugged into the AC outlet before making any rear terminal connections.
AC power socket
CLK (CLOCK) OUT terminal
This socket connects to the power cord. Insert the cord
Output terminal to control an external camera switcher.
firmly.
CALL OUT terminal
SET IN terminal
Input terminal for alarm recording. The alarm sensor is
connected here.
RST (RESET) IN terminal
input terminal to stop alarm recording when “ALARM REC
DURATION” of the “RECORDING SET UP” menu is set
to “MAN1
The alarm reset switch is connected here.
This terminal can also be used to set the on-screen clock
when set to any mode other than “MAN1
REC IN terminal
Input terminal to start/stop recording. Also, use this
terminal for series recording
or synchronous
recording (P.21).
GND (GROUND) terminal
When a lead connected to other terminals requires a
ground, connect the ground lead here.
ALM (ALARM) OUT terminal
Output terminal to indicate alarm recording to an external
alarm.
MODE OUT terminal
Output terminal to indicate the VCR’s mode of operation
which can be selected by setting the “MODE OUT” on
the “REAR TERMINAL” menu.
Output terminal to indicate when tape has finished
recording or if there has been a problem during recording.
RESET button
When pressed, the present time, alarm recording list, power
loss list and the number of tape use will be erased. While
the button is pressed, the power is cut off from the VCR.
If
there is a tape in the VCR and the button is released, the
power indicator will light and the tape will fast forward for a
few seconds. The VCR will then switch off.
REMOTE jack
Remote control is possible by connecting the optional
remote control unit (VCR-4RC) here. Refer to page 34.
VIDEO OUT connector
Output connector for video signal (BNC connector).
IN connector
Input connector for video signal (BNC connector).
AUDIO OUT connector
Audio output connector (RCA pin)
IN connector
Audio input connector (RCA pin).
MIC IN jack
Input jack for a Microphone rated at 600 ohms impedance
9
