background image

 Setting Daylight Saving Time

To put the clock forward by 1 hour, set DAYLIGHT SAVINGS to ON.

Turn the SHUTTLE ring to the right. The DAYLIGHT SAVINGS display will flash.

Turn the JOG dial to select “ON.”

l

The clock is put forward by 1 hour and the daylight saving time symbol 

 will

be displayed next to the present time display.

l

To cancel daylight saving time, switch “DAYLIGHT SAVINGS” to “OFF.”

l

Should a power failure occur while Daylight Saving Time is selected, the power

failure mark 

 will replace the daylight saving time symbol. When the power

failure mark 

 disappears, the daylight saving time symbol 

 will reappear.

 Setting the month

Turn the SHUTTLE ring to the right. The month display will flash.

Turn the JOG dial to the right to set the “MONTH.”

•! Setting the date

Turn the SHUTTLE ring to the right. The date display will flash.

Turn the JOG dial to the right to set the “DATE.”

 Setting the year

Turn the SHUTTLE ring to the right. The year display will flash.

Turn the JOG dial to the right to set the “YEAR.”

l

The year digits can be set to 97 (for year 1997)   27 (for year 2027)

Setting the present time

Turn the SHUTTLE ring to the right. The hour digits of “TIME” display will flash.

Turn the JOG dial to the right to set the hour digits of the present time.

l

Set the 10 minutes digit and 1 minute digit in a similar fashion.

 Turn the SHUTTLE ring to the right,

Setting is now complete.

<TIME DATE ADJUST>

DAYLIGHT SAVINGS

M O N T H

DATE

YEAR

TIME

<TIME DATE ADJUST>

DAYLIGHT SAVINGS

OFF

MONTH

DATE

 

YEAR

TIME

<TIME DATE ADJUST>

DAYLIGHT SAVINGS

OFF

 Press the DISPLAY button.

DATE

YEAR

The present time display will appear.

TIME

 

.

The POWER button will not operate if any of the menu displays are flashing.

n

SETTING THE PRESENT TIME TO THE EXACT SECOND

Set the 10 minutes digit and 1 minute 

 as described above, then 1 minute digit flashes and the second digit stays at 

Turn the SHUTTLE ring to the right when the Time Signal reaches 00 second of the time you have set. The present time Will

start counting from 00 second.

1 7

Summary of Contents for VCR406






































Reviews: