One-shot recording or Interval recording is possible when the recording mode is set to
OH.
Press the
MODE button to set the recording mode to OH.
Set the number of fields in “ONE
on the “RECORDING SET UP” menu.
For One-shot recording, select “SHOT” in “ONE
For Interval recording, choose the interval time from
to
in “ONE
Press the REC button.
One-shot recording will be on stand by mode, Interval recording begins recording with the preset interval time.
To start One-shot recording, press the REC button or switch the REC IN terminal on the rear panel to ground.
A number of camera images can be mixed together through a camera switcher and then recorded separately onto several
VCRs. Assigned to each VCR with the VCR recording only the camera image it has been assigned.
This allows recording
without gaps.
If you have three VCRs, the video signal from three cameras can be recorded separately by connecting the switcher as shown below.
V-SYNC
I
SWITCHER/ switching cameras
CAMERA2 CAMERA3 CAMERA1
CAMERA2 CAMERA3 CAMERA1
CAMERAS?
CAMERA3
recording
signal
L - l
VCR 1
I recording
R E C
REC
REC
/clock out
V C R 2
recording
REC
I clock out
L - l
L-J
V C R 3
recording
1
REC
clock out
L-J
Connection:
CAMERA1
CAMERA2
CAMERA3
VIDEO IN
i
CLK OUT
I
REC IN
CLK OUT
REC IN
Set the “REC IN” of “REAR TERMINAL” menu to “SERIES” or “REC-START/STOP” on
Set the “CLOCK OUT” of “REAR TERMINAL” menu to
and
on
.
Set the “REC IN” of “REAR TERMINAL” menu to “SYNC REC” all VCRs except
.
.
If recording start signal is available on the switcher, set
IN” of the “REAR TERMINAL” menu to “SYNC
Then, VCR1 will always record the picture from
l
You must set the recording mode to
or
mode.
l
The suitable numbers of VCRs and cameras are shown in the table.
2 1