11
Advanced Functions
Reference page
Alarm Recording
If an alarm occurs, the VCR switches to alarm recording.
page 20 for alarm recording connection
Example)
When ALARM REC MODE is set to L30H and
ALARM REC DURATION is 10 min.
Alarm signal input
L30H
Recording
10 min
Recording
Alarm Recording
<MAIN MENU>
DISPLAY
TIMER PROGRAM
RECORDING SET UP
REAR TERMINAL
MAINTENANCE
CLOCK/FIRST TIME SET UP
<RECORDING SET UP>
ALARM REC MODE
6H
ALARM REC DURATION
1M
EMERGENCY REC
OFF
CLOG DETECT
ON
SUPER RESOLUTION
ON
<RECORDING SET UP>
ALARM REC MODE
6H
ALARM REC DURATION
1M
EMERGENCY REC
OFF
CLOG DETECT
ON
SUPER RESOLUTION
ON
<RECORDING SET UP>
ALARM REC MODE
L30H
ALARM REC DURATION
1M
EMERGENCY REC
OFF
CLOG DETECT
ON
SUPER RESOLUTION
ON
<RECORDING SET UP>
ALARM REC MODE
L30H
ALARM REC DURATION
1M
EMERGENCY REC
OFF
CLOG DETECT
ON
SUPER RESOLUTION
ON
<RECORDING SET UP>
ALARM REC MODE
L30H
ALARM REC DURATION
10M
EMERGENCY REC
OFF
CLOG DETECT
ON
SUPER RESOLUTION
ON
Special day of the week
Set the recording period by specifying the start and end day of
the week for timer recording.
1. Display <TIMER PROGRAM> menu.
2. Turn JOG to select SPECIAL DW and
turn SHUTTLE to the right.
3. Turn JOG to set the start and end day
of the week, and turn SHUTTLE to the
right.
4. Press MENU button.
•
The day and present time display appears on screen.
Note
•
Start day of the week and end day of the week cannot be
identical.
When the recording period of 2 or more programs are
overlapped
The VCR always gives priority to the higher-numbered program.
Info.
•
To make sure that the HOLIDAY SET UP setting is applied
correctly, set a timer program with HLD in DW column to the
higher-numbered program.
<TIMER PROGRAM>
PROGRAM TO RECORD
HOLIDAY SET UP
SPECIAL DW
MON-SAT
Holiday set up
Up to 20 days per year can be set for Holiday for when the timer
recording will be performed, or if HR in PROGRAM TO RECORD
menu is set to SKIP, the timer recording will not be performed
during the programmed period.
1. Display <TIMER PROGRAM> menu.
2. Turn JOG to select HOLIDAY SET UP
and turn SHUTTLE to the right.
•
<HOLIDAY SET UP> menu
appears.
3. Turn JOG to move the cursor (
) and turn SHUTTLE to the
right.
•
Each time JOG is turned to the right, the cursor moves
towards right-forward direction.
4. Turn JOG to select the month you want, and turn SHUTTLE
to the right.
5. Turn JOG to select the day you want, and turn SHUTTLE to
the right.
Repeat steps 3 to 5 to set 2 or more days at once.
6. Press MENU button.
•
The day and present time display appears on screen.
Info.
•
To erase the pre-set month and day, turn SHUTTLE to the left
while the month item is flashing.
<HOLIDAY SET UP>
01/01 01/15 02/11 03/22
04/29 05/03 05/04 05/05
07/20 09/15 09/23 10/10
11/03 11/23 12/23 - - / - -
- - / - - - - / - - - - / - - - - / - -
MONTH / DAY
1. Press MENU button.
•
<MAIN MENU> appears.
2. Turn JOG to select RECORDING SET
UP and turn SHUTTLE to the right.
•
<RECORDING SET UP> menu
appears.
3. When the cursor (
) is next to ALARM
REC MODE, turn SHUTTLE to the
right.
4. Turn JOG to set the alarm recording
mode you want and turn SHUTTLE to
the right.
5. Turn JOG to select ALARM REC
DURATION and turn SHUTTLE to the
right.
6. Turn JOG to set the alarm recording
duration you want and turn SHUTTLE
to the right.
•
When set to MAN 1, alarm
recording continues until RST IN
terminal is grounded.
•
When set to MAN 2, alarm
recording continues while ALM IN
terminal is grounded.
7. Press MENU button.
•
The day and present time display
appears on screen.
Info.
•
The index signal is automatically recorded when an alarm
recording begins. (The Index indicator (
) flashes on the
fluorescent display).
•
Even if an alarm recording is proceeding, the new alarm
recording starts when the next alarm signal is input. (While an
index signal is being recorded and then the next alarm signal
is input, the second signal may not be detected during skip or
index search.)
•
An alarm recording continues till its end during timer
recording, even if the timer recording end-time reaches.
•
An alarm recording will be cancelled if the tape reaches its end.
•
If the interval between two alarm recording start-times is too
short, the skip or index search may not function correctly. (
for the minimum interval between two alarm recording start-
times, go to page 18.)
Info.
•
To erase a program:
Select the program number you wish to erase, turn SHUTTLE
to the right (DW column flashes) and then turn SHUTTLE to
the left.
Summary of Contents for VCR407
Page 39: ...35 Others Reference page...
