13
Advanced Functions
Reference page
<MAIN MENU>
DISPLAY
TIMER PROGRAM
RECORDING SET UP
REAR TERMINAL
MAINTENANCE
<RECORDING SET UP>
ALARM REC MODE
6H
ALARM REC DURATION
1M
EMERGENCY REC
OFF
CLOG DETECT
ON
SUPER RESOLUTION
ON
ALARM REC DURATION
1M
EMERGENCY REC
OFF
CLOG DETECT
ON
SUPER RESOLUTION
ON
ONE SHOT•FIELD
1
ONE SHOT•INTERVAL
10S
ALARM REC DURATION
1M
EMERGENCY REC
OFF
CLOG DETECT
ON
SUPER RESOLUTION
ON
ONE SHOT•FIELD
5
ONE SHOT•INTERVAL
10S
EMERGENCY REC
OFF
CLOG DETECT
ON
SUPER RESOLUTION
ON
ONE SHOT•FIELD
5
ONE SHOT•INTERVAL
10S
One shot/Interval Recording
One shot recording allows you to control the number of fields to
be recorded when the REC button is pressed or the REC IN
terminal is grounded. Interval recording is made at the selected
number of fields and at the selected interval.
1. Press REC/PLAY MODE button on the front panel to set the
recording mode to 0H.
2. Press MENU button.
•
<MAIN MENU> appears.
3. Turn JOG to select RECORDING SET
UP and turn SHUTTLE to the right.
•
<RECORDING SET UP> menu
appears.
4. Turn JOG to select ONE SHOT•FIELD
and turn SHUTTLE to the right.
5. Turn JOG to select the number of
recording field and turn SHUTTLE to
the right.
6. Turn JOG to select ONE
SHOT•INTERVAL and turn SHUTTLE
to the right.
For one shot recording, setup step 7 only:
7. Turn JOG to select SHOT and turn
SHUTTLE to the right.
For interval recording, setup step 8 only:
8. Turn JOG to select the recording
interval and turn SHUTTLE to the right.
9. Press REC button.
•
The one shot recording will be on standby mode.
•
The VCR starts the interval recording with the interval time
selected in step 6 above.
10. To start one shot recording, press REC button again or switch
the REC IN terminal on the rear panel to the ground.
EMERGENCY REC
OFF
CLOG DETECT
ON
SUPER RESOLUTION
ON
ONE SHOT•FIELD
5
ONE SHOT•INTERVAL
SHOT
EMERGENCY REC
OFF
CLOG DETECT
ON
SUPER RESOLUTION
ON
ONE SHOT•FIELD
5
ONE SHOT•INTERVAL
30S
Remote Recording
This function permits you to control the start/end of recording
from the remote place. The VCR starts recording while the REC
IN terminal is grounded.
1. Display <REAR TERMINAL> menu.
2. Set REC IN to REC-START/STOP.
3. Press MENU button.
•
The day and present time display
appears on screen.
page 21 for remote recording connection.
Note
•
An index signal will not be recorded during remote recording.
•
Series or timer recording function cannot be used with remote
recording at the same time.
Repeat Recording
With this function, when the tape reaches its end during
recording, the VCR rewinds the tape and starts recording again.
1. Press MENU button.
•
<MAIN MENU> appears.
2. Turn JOG to select CLOCK/FIRST
TIME SET UP and turn SHUTTLE to
the right.
•
<FIRST TIME SET UP> menu
appears.
3. Turn JOG to select TAPE END and turn
SHUTTLE to the right.
4. Turn JOG to select REPEAT or
ALARM•PROT and turn SHUTTLE to
the right.
Refer to the table below for REPEAT
and ALARM•PROT.
Repeat indicator (
) illuminates on
the fluorescent display.
5. Press MENU button.
•
The day and present time display appears on screen.
<REAR TERMINAL>
CALL OUT
WRNG•TAPE END
CLOCK OUT
REC- 1
MODE OUT
REC
REC IN
REC-START/STOP
<MAIN MENU>
DISPLAY
TIMER PROGRAM
RECORDING SET UP
REAR TERMINAL
MAINTENANCE
CLOCK/FIRST TIME SET UP
<FIRST TIME SET UP>
TIME DATE ADJUST
TAPE END
STOP
QUASI V-SYNC
ON
VIDEO MODE
AUTO
TAPE LENGTH
T-120
BUZZER
WRNG
<FIRST TIME SET UP>
TIME DATE ADJUST
TAPE END
STOP
QUASI V-SYNC
ON
VIDEO MODE
AUTO
TAPE LENGTH
T-120
BUZZER
WRNG
<FIRST TIME SET UP>
TIME DATE ADJUST
TAPE END
REPEAT
QUASI V-SYNC
ON
VIDEO MODE
AUTO
TAPE LENGTH
T-120
BUZZER
WRNG
TAPE END
setting
REPEAT
REWIND
ALARM•
PROT
STOP
The tape stops.
When there are alarm
recordings on tape
When there is NO alarm
recording on tape
The tape stops.(*)
The tape is rewound
automatically to the
beginning and then
recording is resumed.
The tape is rewound automatically to the
beginning (except in timer recording) and
then stops.
The tape is rewound automatically to the
beginning and then recording is resumed
(also recording over existing alarms).
When the tape reaches its end during recording
The following functions are automatically engaged when the tape
ends during recording.
*
To repeat recording on the same tape again, eject the tape
once and reinsert.
Summary of Contents for VCR407
Page 39: ...35 Others Reference page...
