24
Installation
Note
A point to notice
Info.
Supplementary information
Setting the Menus (Cont.)
DISPLAY
Setting the display mode (DISPLAY MODE)
1 : Shows date and present time.
2 : Shows date, day of the week,
present time and recording mode.
3 : Displays nothing. In case of alarm
recording, displays same items as
DISPLAY MODE 2.
4 : Displays nothing.
<DISPLAY>
DISPLAY MODE
1
TIME DATE SIZE
SMALL
BLUE BACK
OFF
e.g.<MODE 1>
07-09-’01 00:00:00
Month
Day
Year
Hour
Alarm
Recording
Counter*
Second
Minute
0 7 - 0 9 - ’ 0 1 2 0 : 2 5 : 0 0 A 0 0 0 1
DISPLAY MODE 1
Month
Day
Day of
the Week
Year
Hour
Alarm
Recording
Counter*
Second
Minute
0 7 - 0 9 - ’ 0 1 M O N A 0 0 0 1
2 0 : 2 5 : 0 0 6
Recording
Mode
DISPLAY MODE 2 and 3
RECORDING SET UP
Setting the alarm recording mode
(ALARM REC MODE)
Sets the alarm recording time mode.
•
Providing TAPE LENGTH in FIRST
TIME SET UP menu is set to T-120.
When JOG is turned, the display will
be switched in the order of 6H
L18H
L30H
6H
...
•
Providing TAPE LENGTH in FIRST TIME SET UP menu is set
to T-160.
When JOG is turned, the display will be switched in the order
of 8H
L24H
L40H
8H
...
Setting the alarm recording duration (ALARM REC
DURATION)
Sets the duration of the alarm recording period. When JOG is
turned, the display will be switched in the order of 1M (minute)
2M
5M
10M
MAN1
MAN2
15S (second)
30S
45S
1M
...
Setting the emergency recording (EMERGENCY REC)
ON
: Starts alarm recording when the ALM IN terminal is
grounded while the VCR is recording, in stop mode,
turned off or in stand-by mode for timer recording.
OFF
: Starts alarm recording when the ALM IN terminal is
grounded during recording.
Setting the clog detection (CLOG DETECT) (For 168-hour
model only)
ON
: The VCR automatically removes any particles that may
accumulate on the heads during the recording at 120H-
224H or 0H. If it cannot be entirely removed, a warning
“CLOg” flashes on the fluorescent display (
page
31).
OFF
: The VCR does not detect clogged head.
<RECORDING SET UP>
ALARM REC MODE
6H
ALARM REC DURATION
1M
EMERGENCY REC
OFF
CLOG DETECT
ON
SUPER RESOLUTION
ON
ONE SHOT•FIELD
1
ONE SHOT•INTERVAL
SHOT
TIMER PROGRAM
page 10, Timer Recording.
ENGLISH
FRANÇAIS
ESPAÑOL
Use JOG to select,
and ENTER .
LANGUAGE SELECTION
The menu which appears on screen offers 3 languages, English
(ENGLISH), Spanish (ESPAÑOL) or French (FRANÇAIS).
This menu appears by pressing MENU button, when the VCR is
turned on for the first time after the purchase or when RESET
button is pressed during use.
1. Press MENU button.
•
The menu as shown to the right
appears.
2. Turn JOG to select the desired
language.
3. Turn SHUTTLE to the right.
•
<MAIN MENU> in the selected language appears on
screen.
4. Press MENU button to exit.
Note
•
After first time setup and selection of the language to be used,
the only way to go back and access the main menu in the
three languages is to PRESS the RESET button found on the
rear panel. The RESET button can be accessed with a small
pointed object. Once the RESET button is pressed, repeat
steps 1 to 4 above.
MAIN MENU
DISPLAY
Sets the display format of the date
and present time on screen.
TIMER PROGRAM
Sets the timer recording.
RECORDING SET UP
Sets the alarm recording mode,
alarm recording duration and emergency recording, etc.
REAR TERMINAL
Sets the frequency division ratio of CLOCK OUT, output
signal of CALL OUT terminal and MODE OUT terminal, etc.
MAINTENANCE
Displays the power loss list and alarm list, etc. Also,
initializes all menu settings, clears the power loss list and
alarm list.
CLOCK/FIRST TIME SET UP
Sets the present time and the operation at the tape end, etc.
<MAIN MENU>
DISPLAY
TIMER PROGRAM
RECORDING SET UP
REAR TERMINAL
MAINTENANCE
CLOCK/FIRST TIME SET UP
Use JOG to select,
and ENTER.
Press MENU to exit.
* shown when DISPLAY MODE 1, 2 or 3 is selected.
Setting the size of letter for date and present time display
(TIME DATE SIZE)
SMALL : The size of the letters become small.
LARGE : The size of the letters become large.
Setting the background color (BLUE BACK)
ON
: The blue colored screen overlays on the recorded
picture when the menu is displayed on the monitor.
OFF
: The recorded picture is overlaid with the menu display.
Note
•
When the setting is OFF and the video signal is not input, the
blue colored screen overlays on the recorded picture when the
menu is displayed on the monitor.
•
When the setting is ON and the video signal is not input, the
background color will be in blue. Also, the warning “NO
SIGNAL” flashes on screen and “noSIg” flashes on the
fluorescent display during recording.
Summary of Contents for VCR407
Page 39: ...35 Others Reference page...
