26
Installation
Note
A point to notice
Info.
Supplementary information
FIRST TIME SET UP
Setting the present time, date and
Daylight Saving Time settings (TIME
DATE ADJUST)
page 22
Setting operation of VCR when the
tape reaches its end during recording
or playback (TAPE END)
The VCR’s function when the tape reaches its end during
recording is as follows.
STOP
: The tape stops, the indication “End” appears on
the fluorescent display and “TAPE END” on
screen. When CALL OUT is set to WRNG•TAPE
END, a call signal is output from the CALL OUT
terminal.
REWIND
: Rewinds the tape to the beginning and stops
(except during timer recording). When CALL OUT
is set to WRNG•TAPE END and a tape reaches
its end, a call signal is output for 2 seconds from
the CALL OUT terminal.
REPEAT
: Rewinds the tape to the beginning and resumes
the recording. When CALL OUT is set to
WRNG•TAPE END and a tape reaches its end, a
call signal is output for 2 seconds from the CALL
OUT terminal.
ALARM•PROT (alarm protection)
:
If any alarm recordings are present on the tape
and the tape stops, the indication “End” appears
on the fluorescent display and “TAPE END” on
screen. When CALL OUT is set to WRNG•TAPE
END, a call signal is output from the CALL OUT
terminal. If there is no alarm recording, the VCR
rewinds the tape to the beginning and resumes
the recording.
Go to page 8 for the VCR’s function when the tape reaches
its end during playback.
Setting Quasi-V-sync on or off (QUASI V-SYNC)
ON
: Quasi-V-sync. signal is inserted to the video output
signal in the special effects playback (
page 16) or
normal playback in L18H-128H (for 96-hour model),
L18H-224H (for 168-hour model) or 0H mode.
OFF
: Quasi-V-sync. signal is not inserted.
Note
•
Some multiplexers may require QUASI V-SYNC to be OFF in
order to work properly.
Setting the playback/recording color mode (VIDEO MODE)
AUTO
: The VCR automatically switches the circuits according
to type of the input/playback video signal, color or black
& white.
B/W
: Select for recording or playback in black & white.
Setting the tape length (TAPE LENGTH)
T-120
: Select when using a T-120 tape.
T-160
: Select when using a T-160 tape.
Setting to sound buzzer during warning (BUZZER)
WRNG
: The buzzer sounds when there is any
malfunction in the VCR.
WRNG•TAPE END : The buzzer sounds when there is any
malfunction in the VCR or the tape reaches
its end.
<FIRST TIME SET UP>
TIME DATE ADJUST
TAPE END
STOP
QUASI V-SYNC
ON
VIDEO MODE
AUTO
TAPE LENGTH
T-120
BUZZER
WRNG
RS-232C
WRNG•REMAIN
: The buzzer sounds when there is any
malfunction in the VCR or the tape has
approximately 9 minutes (at 6H mode) left.
OFF
: The buzzer does not sound.
Note
•
To stop the buzzer:
Press MENU button once. If <MAIN MENU> appears, press
MENU button again to exit the menu. When the VCR is
locked, press LOCK button to unlock the VCR, then the
buzzer stops.
Setting the Menus (Cont.)
Summary of Contents for VCR407
Page 39: ...35 Others Reference page...