ALARM RECORDING
It Is possible to switch from all recording modes to the 2H
recording mode by applying an alarm signal to
the SET IN terminal on the rear panel.
SET INPUT
l
It is possible to switch to the alarm recording by
applying the set signal from the alarm sensor
during recording in
48H
960H or OH mode.
+I
NORMAL made
ALARM mode
NORMAL
-
-
l
Set the alarm recording mode and alarm recording period with the “RECORDING SET UP” menu. (See page 14.)
l
The index signal is automatically recorded when an alarm recording begins. (INDEX indicator flashes on the fluorescent
display.)
. To record the index signal, the first 15 seconds of the alarm recording are in 2H or 6H mode.
l
While the index signal is being recorded (for 15 seconds), if another set signal is applied to the SET IN terminal, it will not
trigger a new alarm recording.
Alarm set
switch
External alarm
lamp
and buzzer
Alarm reset switch
l
The alarm can be confirmed from a distance
by connecting the ALM (ALARM) OUT
terminal to an existing alarm system panel or
other external devices such as a buzzer.
1st VCR
2nd VCR
If
REC DURATION” of the “RECORDING SET UP” menu is set to other than
the on-screen clock can
be reset to the nearest hour, by applying a signal to the RST IN terminal. For example, if the current time is
it will
be reset to 11 :OO:OO; and if the currenl time is
it will be reset to
‘1: When connecting the MODE terminal of the 1 st VCR with RST (RESET) IN terminal of the 2nd VCR and if the “MODE
OUT’ of the “REAR TERMINAL” menu is set to “CLOCK
the on-screen clock of the 2nd VCR will automatically be
adjusted to that of the 1 st VCR.
2 7
