When alarm recordings begin, the start times are stored in memory, so it is possible to
confirm when they have occurred. Select the “ALARM LIST” in the “MAINTENANCE” menu
and the alarm list display will appear on the screen.
.
Up to 3 alarm recording start times can be stored in memory. For more than that, the first and
the last 2 times will be displayed.
l
The alarm recording list is reset by the following procedure.
1 .
Select the “ALARM LIST CLEAR” in the “MAINTENANCE” menu.
2 .
Turn the SHUTTLE ring to the right. “ALARM LIST CLEAR” will be displayed.
3 .
Turn the SHUTTLE ring to the left. “ALARM LIST” will be cleared.
This machine automatically inserts an index signal at the beginning of each
RECORDING, allowing the start of
each alarm to be located.
INDEX SEARCH
During fast forward or rewind, the machine will search for Alarm index signals. When an Index signal is found, the VCR will
playback the tape and stay in still mode.
q
Press the COUNTER MEMORY/SKIP/INDEX button to illuminate “INDEX” on the fluorescent display.
(On the fluorescent display “INDEX” will be illuminated and the number indication will be illuminated.)
q
Turn the JOG dial to display the number (l-l 5) corresponding to the alarm index you desire to locate.
q
Turn the SHUTTLE ring to the right (forward direction) or left (reverse direction).
(The program indication number will decrease one by one as each index signal goes by.)
l
The index signal may be difficult to locate in some recording conditions.
Rewind
direction
SKIP SEARCH
The VCR will fast forward or rewind until an index signal is located and then playback for about 4 seconds in 2H or 6H
mode. This process is repeated until the end or beginning of the
tape is reached.
Present
q
Press the COUNTER MEMORY/SKIP/INDEX button to
minate “SKIP” on the fluorescent display.
Turn the SHUTTLE ring to the right or left.
RECORDING
RECORDING
4 sec.
4
Until the index signal is located, the machine will fast forward (or rewind). When an index signal is located, the machine
will playback (in 2H or 6H mode) for about 4 seconds. This process will be repeated until the end or the beginning of the
tape is reached.
l
When the desired position is located, press the PLAY button.
l
To stop SKIP SEARCH, press the STOP button.
l
The index signal may be difficult to locate in some recording conditions.
29
