CONTROL INPUT/OUTPUT SIGNALS AND CIRCUITS
SET/
REC IN terminals (screw)
Active:
When input terminals are short-circuited to GND or
level voltage (0 +
applied.
Time for active:
0.1
or over.
Non
active:
Open the
input.
IN
<Interface circuit inside the
MODE/CALL OUT terminals (screw) Active:
Non
active:
Level voltage (0
output; max. drive current
DC)
Open; max. voltage
DC
ALM MODE/ CALL OUT
circuit inside the
n
CLK OUT terminal (screw)
<Interface circuit inside the
CLK OUT signal
l
When
is selected in REC of CLOCK OUT mode in 2H or 6H recording or
during recording in
960H mode.
l
When except
is selected in REC of CLOCK OUT mode in 2H or 6H recording.
. .
,
3 5