background image

- 3 -

FCC COMPLIANCE STATEMENT

FCC INFORMATION :

 THIS EQUIPMENT HAS BEEN TESTED AND FOUND 

TO COMPLY WITH THE LIMITS FOR A CLASS

 

A DIGITAL DEVICE, 

PURSUANT TO PART 15 OF THE FCC RULES. THESE LIMITS ARE 
DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST HARMFUL 
INTERFERENCE WHEN THE EQUIPMENT IS OPERATED IN A 
COMMERCIAL ENVIRONMENT. THIS EQUIPMENT GENERATES, USES, 
AND CAN RADIATE RADIO FREQUENCY ENERGY AND IF NOT INSTALLED 
AND USED IN ACCORDANCE WITH THE INSTRUCTION MANUAL, MAY 
CAUSE HARMFUL INTERFERENCE TO RADIO   COMMUNICATIONS. 
OPERATION OF THIS EQUIPMENT IN A RESIDENTIAL AREA IS LIKELY TO 
CAUSE HARMFUL INTERFERENCE IN WHICH CASE THE USER WILL BE 
REQUIRED TO CORRECT THE INTERFERENCE AT HIS OWN EXPENSE.

CAUTION :

 CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED 

BY THE PARTY RESPONSIBLE FOR COMPLIANCE COULD VOID THE 
USER'S AUTHORITY TO OPERATE THE EQUIPMENT.

THIS CLASS A DIGITAL APPARATUS COMPLIES WITH CANADIAN ICES-003.

NORME NMB-003 DU CANADA.

WARNING

This is a Class A product.  In a domestic environment this product may cause 
radio interference in which case the user may be required to take adequate 
measures.

CE COMPLIANCE STATEMENT

Summary of Contents for VM621-5














Reviews: