Vicon XX123-00-02, Installation & Operation Manual

8  

••

 Operation 

XX123-00-02 Rev 203 Network Interface 

When using the GUI for first time use, click on Site List on the right side of the GUI panel. Enter the IP address 
just programmed into AURC-NIU and give it a name. Click Connect. The Login screen will display, as shown 
below. From the drop down list, select admin; the default password is “vicon”. Click OK.  

Note: If multiple AURC-NIUs are connected to the system, and IP addresses have been programmed in them, 

they all can be added to the Site List at this time. The PC will save the list. 

 
The GUI buttons have the following functions: 

a.  Full Image/Small Image: Click these buttons to change the size of the video image displayed. 

When set at 1024, the Full Image is 6.75 in. width and 4.75 in. in length and the Small Image 
is 3.75 in. width and 2.75 in. in length. 

b.  Site List: Displays a list of AURC-NIU IP addresses. 

c.  Play Back: A video or still image can be selected for play back. A list of recorded events is 

displayed  by date and time. Select an event. When viewing an image, the “snapshot” will 
appear. When video is selected, press the play button (

4

). The pointer arrow indicates the 

relative position of the video, and it can be manually moved. The maximum size of a recorded 
event is 47.7 M, which is about 7 minutes of video. If recording goes beyond that size, a 
second file is automatically created with the same name plus an underscore and numeral (1, 
2, etc.). Pressing Reload updates the current directory; pressing Path selects a directory.