3
·
To protect against the risk of burn, do not touch the detachable plates.
·
Do not place the curling iron directly on any surface while it is hot still plugged in. Use the built-in stand provided.
·
Do not use a cord extension.
·
Do not attempt to repair, adjust or replace parts in the curling iron. Repair the malfunctioning appliance in the nearest
service center.
CAUTION:
·
The appliance is hot when in use.
·
Your curling iron is designed with a protective coating around the heating coils. When plugged in and operating for the
first time, they may be a little momentary smoking while this coating is initially heated. This represents no danger to the
user and does not indicate a defect in your curling iron. When using for the first time, allow it to continue running until
the smoke dissipates. This should last only about 30 seconds.
INSTRUCTION FOR USE
·
Fully unwind the cord.
·
Set the curling iron on flat surface on built-in stand.
·
Plug the appliance into the power supply. When switch in middle position OFF , the appliance is not getting hot.
·
Setting the heat level, thus the indicator light should light up:
-
1 (LO) - for hair that has been color-treated, fragile or damaged hair;
-
2 (HI) for normal, easy-to-curl hair and hard-to-curl hair.
·
Allow the appliance to heat a few minutes (~5 minutes).
·
Divide your hair into locks; clamp the lock and curl the hair. Keep the section of hair taut as you wind it around the hot
barrel by turning the handle with one hand and the cool safety tip with the other.
·
Hold the curl in place for up to 20 seconds. Push down on the clamp release lever to open the clamp.
·
Do not comb hair right after a curling, give it time to cool down.
·
When finished unplug the appliance from power supply.