http://www.vicsign.com
User manual of HWQ series vinyl cutter
17
/
29
5 Operating instructions
a Control Panel illustration
b Off-line/On-line
When the cutter starts or resets, it becomes in online state. Press “Offline/Pause” button to switch to off-line state.
When computer transmits signals to the plotter, the plotter must be Online. The LCD will display the Speed/force
information as follows:
1. Offline pause
1.Switch On-line state to Off-line state
2, Can be suspended when cutting.
2. Origin
1. press” ”” ” to move car and “
” to move media, then press”
Origin” button to make old coordinates cleared, and set up new
origin.
2, Press the button at online state to read SD card file,
press”
”,”
” select file, then press “Enter” to work
3. Test
Text cutting effect
4. Reset
Reset and clear cache memory data on main-board.
5.Enter
After selecting SD file,press button,machine operates order.
6.Mode
1,Change “blade mode” to “pen mode”
2,MPX,MPY to adjust override.
4
5
6
3
2
1
