Pipe Size
Dimensions
inches/millimeters
Original Groove
System Type
“ES” Type
Nominal
Size inches
Actual Outside
Diameter
inches/mm
Steel Pipe Wall Thickness Stainless Steel Pipe Wall Thickness
Roll Part
Numbers
Roll Part
Numbers
Minimum
Maximum*
Minimum
Maximum
42 OD
42.000
0.250
0.375
0.375
0.375
Lower Roll
R942460L48
Upper Roll
R9Q1448U48
Roll Set
R9Q1460048
1067.0
6.4
9.5
9.5
9.5
44 OD
44.000
0.250
0.375
0.375
0.375
1118.0
6.4
9.5
9.5
9.5
46 OD
46.000
0.250
0.375
0.375
0.375
1168.0
6.4
9.5
9.5
9.5
48 OD
48.000
0.250
0.375
0.375
0.375
1219.0
6.4
9.5
9.5
9.5
* When roll grooving pipes at or near the maximum rated thickness, the pipe must not exceed the yield
strength of API-5L Grade “B”, ASTM Grade “B”, 150 Brinell Hardness Number (BHN) maximum.
Types 304/304L and 316/316L stainless steel pipe
The wall thicknesses listed are nominal minimum and maximum
In addition, the following pipe sizes may be roll grooved: 108.0 mm; 133.0 mm; 139.7 mm; 152.4 mm;
159.0 mm; 165.1 mm; 203.2 mm; 216.3 mm; 254.0 mm; 267.4 mm; 304.8 mm; 318.5 mm; 377.0 mm; and
426.0 mm. Contact Victaulic for details.
ORIGINAL GROOVE SYSTEM AND “ES” ROLLS FOR STEEL AND SCHEDULE 40 STAINLESS
STEEL PIPE - COLOR CODED BLACK (CONTINUED)
(For light-wall stainless steel pipe, refer to separate table)
TM-VE460_57
TM-VE460
OPERATING AND MAINTENANCE INSTRUCTIONS MANUAL
www.victaulic.com
VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY.
REV_A