ORIGINAL GROOVE SYSTEM ROLLS FOR ALUMINUM AND PVC PLASTIC PIPE -
COLOR CODED YELLOW ZINC
Pipe Size
Dimensions
inches/millimeters
RP
Nominal
Size inches
Actual Outside
Diameter
inches/mm
Aluminum Pipe Wall Thickness PVC Plastic Pipe Wall Thickness
Roll
Part Numbers
Minimum
Maximum
Minimum
Maximum
4
4.500
0.083
0.237
0.237
0.337
Lower Roll
RP04460L06
Upper Roll
RPQ1448U06
Roll Set
RPQ1460006
114.3
2.1
6.0
6.0
8.6
41/2
5.000
0.095
0.237
127.0
2.4
6.0
5
5.563
0.109
0.258
0.258
0.375
141.3
2.8
6.6
6.6
9.5
6
6.625
0.109
0.280
0.280
0.432
168.3
2.8
7.1
7.1
11.0
8
8.625
0.109
0.322
0.322
0.322
Lower Roll
RP08460L12
Upper Roll
RPQ1448U12
Roll Set
RPQ1460012
219.1
2.8
8.2
8.2
8.2
10
10.750
0.134
0.250
273.0
3.4
6.4
12
12.750
0.156
0.250
323.9
4.0
6.4
Aluminum Alloys 6061-T4 and 6063-T4
PVC Type 1, Grade 1 - PVC 1120; PVC Type 1, Grade II - PVC 1220; PVC Type II, Grade 1 - PVC 2116
The wall thicknesses listed are nominal minimum and maximum
For aluminum pipe, the following additional pipe sizes may be roll grooved: 108.0 mm; 133.0 mm;
139.7 mm; 152.4 mm; 159.0 mm; 165.1 mm; 203.2 mm; 216.3 mm; 254.0 mm; 267.4 mm; 304.8 mm; and 318.5
mm. Contact Victaulic for details.
For PVC pipe, the following additional pipe sizes may be roll grooved: 108.0 mm; 133.0 mm; 139.7 mm;
159.0 mm; 165.1 mm; and 216.3 mm. Contact Victaulic for details.
TM-VE460_58
TM-VE460
OPERATING AND MAINTENANCE INSTRUCTIONS MANUAL
www.victaulic.com
VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY.
REV_A