TOOL NOMENCLATURE
NOTICE
• Drawings and/or pictures in this manual may be exaggerated for clarity.
• The tool, along with this operating and maintenance instructions manual, contains
trademarks, copyrights, and/or patented features that are the exclusive property of
Victaulic.
Depth Adjuster
Pipe Size Indicator
Groove Diameter Stop
Upper Shaft and Upper Roll
Stabilizer Roller
Guard and
Stabilizer Roller
Safety Foot
Switch
Lower Roll
Stabilizer
Assembly
Ram Pressure Gauge
Hydraulic Cylinder
Storage Compartment
Eye Bolt (Lifting Point)
Contact with hazardous voltage
inside this door may result in death
or serious personal injury.
• ALWAYS disconnect the tool from
the power source before performing
maintenance or adjustments.
• Only qualified personnel should
open this door.
5038 Rev. B
R090424LAB
Grooving rolls can crush or cut fingers
and hands.
• Always disconnect the tool from the power
source before making any tool adjustments.
• Loading/unloading pipe will place your
hands close to the rollers. Keep hands away
from the grooving rolls and the roller on
the pipe stabilizer during operation.
• Never reach inside the pipe ends or across the tool or pipe during
operation.
• Always groove pipe in a
CLOCKWISE
direction.
• Never groove pipe that is shorter than the recommended lengths
listed in the operating and maintenance manual.
• Never wear loose clothing, loose gloves, or anything that can
become entangled in moving parts.
5037 Rev. C
R091424LAB
Contact with hazardous voltage inside this
cover plate may result in death or serious
personal injury.
• ALWAYS disconnect the tool from the power
source before performing maintenance or
adjustments.
• Only qualified personnel should open this
cover plate.
3308 Rev. B R095424LBL
Failure to follow instructions and warnings could result in
serious personal injury, property damage, and/or product
damage.
• Before operating or servicing any pipe preparation tools,
read all instructions in the Operating and Maintenance
Instructions Manual and all labels on the tool.
• Wear safety glasses, hardhat, foot protection, and hearing
protection when working around tools.
0567 Rev. D
R031272LAB
If you need additional copies of any literature, or if you have questions concerning the safe and proper
operation of any pipe preparation tools, contact Victaulic, P.O. Box 31, Easton, PA 18044-0031, Phone
1-800-PICK VIC, E-Mail: pickvic@victaulic.com.
Roll Guard
System
Main Power
Switch
Electrical
Enclosure
Emergency
Stop Knob
Stop Knob
Hydraulic Pump Start Button
Test (Jog)/Groove/
Set Guard Knob
Dwell Control
Control Panel
Located Under Control Panel
Located on Electrical Enclosure
Located on Front of Tool
TM-VE460_7
TM-VE460
OPERATING AND MAINTENANCE INSTRUCTIONS MANUAL
www.victaulic.com
VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY.
REV_A