Compact Lawn Mower
G287
Instructions for Use
Please read and retain these instructions for future reference
v003:13/01/20
11. Grass box handle
12. Slots
13. Rear door
14. Rear discharge opening
15. Door rod
16. Hooks
INSTALLING THE GRASSBOX
See Figure 4
Insert four screws into the washers to fix the bracket
in the four separate holes, and then snap the bracket
into the groove of the grass box
Insert the latch of the handle into the grass box and
push down to interlock
Lift the rear discharge door.
Lift the grass box by its handle and place under the rear door, so that the hooks on the grass box frame
are seated into the slots in the handle bracket.
Release the rear door. When installed correctly, the hooks on the grass box will rest securely in the
slots on the handle brackets.
21. Front axle
22. Rear axle
SETTING BLADE HEIGHT
(See Figure 5)
When shipped, the wheels on the mower are set
to a low cutting position. Before using the
mower for the first time adjust the cutting
position to the height best suited for your lawn.
The average lawn should be between 38 mm
and 51mm during cool months and between 51
mm and 70mm during hot months.
To adjust the blade height
Release the on/off switch and disconnect the product from the power supply before adjusting the
cutting height.
Turn the product over to access the front and rear cutting height adjustment
