Insert the wall plugs and fix the back box to the wall using the screws provided.
NOTE
: As the mounting surfaces vary, please ensure adequate fixings are used.
Fixings supplied are not suitable for all mounting surfaces, e.g. plaster board.
STEP 5
Wire the main power supply to the terminal block on the back box as belows.
WARNING
: This appliance must be earthed.
STEP 6
RED OR BROWN --- TERMINAL MARKED L (LIVE)
GREEN & YELLOW --- TERMINAL MARKED E OR
BLACK OR BLUE --- TERMINAL MARKED N (NEUTRAL)
STEP 5
STEP 6
IMPORTANT
: Before you fit the front mirror, please connect the wirings of
demister pad for all of the mirrors.
For the item 3061-L-5070, please also connect the wirings of LED strips to the
For the other items, the LED strips are pre-connected.
output of LED driver.
