Operator’s Manual Victory WC-8H
- Page 26 of 64 -
Version 2.0
STEP 8: Mount the Discharge chute
◼
Place the adapter connector (3) on
the flywheel housing and mount
four bolts M10x.. including washers
and spring washers.
◼
Tighten the bolts.
STEP 9: Check Hitch Pins and PTO cover
◼
Ensure the correct Hitch pins are
mounted and secured for your
tractor.
◼
Ensure the PTO protection cover is
installed.
STEP 10: Connect the device to the 3-point hitch
◼
Connect the woodchipper to your
tractor using the 3-point hitch.
◼
Secure all connecting points with
Linchpins.
◼
Or, if you have one, you can connect
the woodchipper using your
category 1 Quick hitch.
W A R N I N G !
•
Ensure all nuts and bolts on the machine are tightened after finishing
the assembly and before using the woodchipper for the first time.
You must make every effort to ensure that all hardware is tightened. It
is a good idea for you to double-check.