BLUETOOTH OPERATION
1. Plug the power plug into the wall outlet with power supply of 120V~60Hz.
2. Switch the Right side button on “ Speaker on” or “Speaker & light on”
position.
3. Turn on the Bluetooth on your external Bluetooth device and select the
pairing name “ITSBL-547” from your device’s Bluetooth settings.
4. The speaker will sound an audible tone and the Bluetooth indicator will stay
lit after successful connection.
5. The speaker will automatically pair and connect with the last paired device if
both the device and the speaker are activated and in range.
6. If using AUX, connect the included AUX cable to the port on the side.
Then connect the 3.5mm auxiliary jack at the other end of the cable to your
device's audio jack.
Please Note: If the speaker is
not connected to a device for an extended
period of time, you may need to turn off the speaker, then back on to
reconnect your bluetooth device.
7
WARNING!
DO NOT TOUCH the Lamp while in use, it is
VERY hot. Before touching make sure the
Lamp has cooled down to room temperature.