SAFETY GUIDELINES
Work or maintenance on the BSL battery should be carried out by
qualified personnel only.
Do not attempt to open or dismantle battery and/or cells.
The electrolyte contained in the battery cells is highly corrosive. In the
event of any damage to or leakage from the cells, treat contents with care,
do not allow contact with exposed skin or eyes. DO NOT INGEST.
The terminals of the BSL battery should always be considered live,
therefore do not place tools or any other items across the terminals. Do
not pierce, short or damage the terminals in any way. Do not touch the
terminals of the battery.
Fire Hazard: Do not discharge battery below specified minimum level as
this poses an increased fire risk. Do not attempt to charge a swollen or
damaged battery. In the event of fire, a
CO
2
or Dry Powder extinguisher
should be used. Class D extinguishers are not suitable.
Dispose of batteries through the proper local regulations. Not suitable for
regular refuse/recycling.
1
Summary of Contents for BSLBATT
