OPERATING INSTRUCTIONS
1. Plug the unit into the mains outlet and move the slider control from position 0 to
position 1.
2. The power LED will light up in green. After a few minutes you will be able to feel
the pad getting noticeably warmer. If you require a higher temperature setting,
move the switch to the next position, 2, or to the maximum heat setting, position 3.
If the pad gets too hot for you, move the slider back to position 2 or 1.
3. After a short while the heating pad cools down noticeably.
4. To switch the unit off, move the switch back to position 0.
5. The green power LED will go out, indicating that the unit is switched off. Unplug
the unit from the mains outlet. Move the selector switch to position 1 or 2 before
falling asleep or any continuous use. The heat pad will switch off automatically
after approx. 90 minutes of continuous use.
6. To switch it back on again, move the slider control to position O and then back to
the desired heat setting.
7. Unplug the unit from the mains outlet once you have finished using it.
CLEANING AND MAINTANANCE
Before cleaning the pad, unplug it from the mains outlet and let it cool down for
at least ten minutes.
The heating pad is equipped with a detachable cable. Disconnect the plug and
remove the cable from the heating pad.
You may wash the heating pad gently by hand. The best way to do this is to put
the heating pad in a bath with lukewarm water and some mild detergent and then
gently squeeze it out.
Rinse the heating pad several times to remove all the detergent.
Store the unit in a clean and dry place, laid out flat with nothing covering or
resting on top of it.
Only use the appliance once it is completely dry.
DISPOSAL
This product must not be disposed of together with domestic waste.
POWER RATING
220-240V-50HZ, 100W
