background image

or if you press the [Power] button during operation, the unit will stop functioning, 

all the lights on the panel will turn off and the massager rollers will return to the 

original position.

MODES

Clockwise/anti-clockwise neck massage
Press this button and the rollers will start a clockwise kneading on the neck. Press 

the button again and the rollers will knead in an anticlockwise direction.
Alternate direction neck massage
Press this button and the rollers will start kneading on the neck. The direction will 

alternately switch between clockwise and anticlockwise.
Upward / Downward
Press and hold the [Upward]/[Downward] button to move the neck massage rollers 

upward or downward to adjust the massage position. Release the button when the 

desired position is achieved.
Back kneading & tapping mode selection
Press this button to start the auto programme of back kneading & tapping, which 

will switch between the following modes in sequence:
1.   kn tapping (intermittent continuous tapping)  

— the indicator light will flash slowly.

2.   kn tapping (continuous tapping)

 

— the indicator light will flash fast.

3.   kn tapping (intermittent tapping)

 

— the indicator light will shine steadily.

Level selection for tapping strength
During the kneading & tapping auto programme, press this button to switch the 

tapping strength between three levels (low/medium/high). The indicator light will 

flash slowly for low level, flash fast for medium level and shine steadily for high level.
Spot
During the kneading & tapping auto programme, press this button to stop the 

massage rollers from moving upward or downward, thus concentrating the 

kneading & tapping on the current.
Massage zone selection: Full/Upper/Lower
Three massage zones can be selected: [Full]/[Upper]/[Lower]. The massage rollers 

will move up and down and massage in the selected zone.
Heat
When the massage mechanism is functioning, press this button to start the  

heat function. L.E.D. lights on the massage rollers will illuminate. Press the button 

again to stop the heat function. The L.E.D. lights on the massage rollers will turn off.

Summary of Contents for VWPMSGCHAIR









Reviews: