60 | 140285
The motor runs, but it
makes irregular noises
or a knocking noise.
Bearing is loose or damaged.
Have a qualified service technician replace the bearing.
Screws in the connection rod are
loose.
Tighten the screws, or replace them if necessary.
Not enough pressure
when painting or
spraying.
Loose air connection(s).
Check all air connections, and tighten them if necessary.
Air hose is damaged.
Replace air hose.
Screws on cylinder cover are loose.
Tighten screws.
Poor spray pattern.
Loose air connections(s).
Check all air connections, and tighten them if necessary.
The paint is too thick.
Add paint thinner and mix thoroughly.
The Airbrush nozzle is plugged or dirty.
Clean or change the nozzle.
Motor runs properly,
but no air pressure or
lack of air delivery.
Valve plate is loose or out of place.
Open the front cover and make sure the valve plate is in the
proper position. Tighten the screws if necessary.
Retainer ring is damaged after
excessive use at high pressure.
Have a qualified service technician replace the retainer ring.
6
Follow all safety precautions whenever diagnosing or
servicing the compressor. Disconnect power supply before
service.
5.2 Model BD air bursh
•
Empty the fluid cup and clean it with water or solvent using
a brush.
•
Refill the cup with water or solvent, then block the needle
cover with your finger and spray. The air flows will be
pushed back into the nozzle and remove leftover paint from
the air brush.
6
Technical specifications
Type
Single Cylinder Piston
Compressor with Air Tank
Power
1/6 HP
Speed
1450/1700 rmp
Air flow
20~23L/min
Auto-stop at 4 Bar (57PSI), and auto re-start from 3
Bar(43PSI)
Working pressure
0~4 bar
Air tank
3.0L
Weight
5.2KG
Dimension
310X150X310mm
Suitable for airbrush with nozzle size of 0.2mm~1.0mm.
Rated voltage
220V-240V~, 50Hz
Rated power
150 W
RPM
1450/min
Safety class
I
Model Bd air bursh
Nozzle diameter
0.3mm
Fluid cup capacity
22cc
DE
Benutzerhandbuch
1 Symbolerklärung
Siehe Bild 1
1. Lesen Sie das Handbuch vor Gebrauch sorgfältig durch.
2. Tragen Sie einen Gehörschutz.
3. Entsorgen Sie Elektrogeräte nicht zusammen mit Ihrem
Haushaltsabfall!
Gemäß der europäischen Richtlinie 2012/19/EU hinsichtlich
elektrischer und elektronischer Geräte und deren Umsetzung in
nationales Recht müssen veraltete elektrische Geräte über eine
umweltgerechte Recyclinganlage gesammelt und entsorgt
werden.
2 Teileliste
2.1
Airbrush-kompressorsatz
Siehe Bild 2
1
Netzschalter
2
Hintere abdeckung
3
Kabel
4
Kondensator
5
Hinterbau
6
Schraube x4
7
Stationärer Motor
8
Lager x2
9
Drehmotor
10
Frontkörper
11
O-Ring
12
Ventilplatte
Summary of Contents for 140285
