iLink Series Scan Tool User Manual V1.0
23
Or
4.6 O2 Monitor Test
1.
Use the
UP/DOWN
key to highlight
O2 Monitor Test
from Diagnostic Menu and press the
OK
key. Use the
UP/DOWN
key to highlight an O2 sensor and press the
OK
key to confirm.
2.
Use the up and down arrow keys to scroll through data to select lines, and left and right arrow
keys to scroll back and forth through different screens of data.
3.
Press
OK
key to view data of selection.
4.
Press the
ESC
key to exit and return.
4.7 On-Board Monitor Test
The On-Board Monitor Test function is useful after servicing or after clearing a vehicle ECU’s
memory. It receives test results for emission-related powertrain components and systems that
are not continuously monitored for Non-CAN vehicles. And for CAN vehicles, it receives test data
for emission-related powertrain components and systems that are and are not continuously
monitored. It is vehicle manufacturer who is responsible for assigning test and component IDs.
1.
Use the
UP/DOWN
key to highlight
On-Board Monitor Test
from Diagnostic Menu and press
the
OK
key.
2.
Depending on the protocol the vehicle used, one of these 2 screens shows.
