iLink Series Scan Tool User Manual V1.0
24
Or
3.
Use the
UP/DOWN
key to highlight a test group and press the
OK
key to confirm. A screen with
details of the selected sensor displays. Use the up and down arrow keys to scroll through data
to select lines, and left and right arrow keys to scroll back and forth through different screens of
data.
4.
Press the
ESC
key to exit and return.
4.8 Component Test
Component Test allows the code reader to control operation of vehicle components, tests or
systems.
1.
Use the UP/DOWN key to highlight Component Test from Diagnostic Menu and press the OK
key.
2.
Use the
UP/DOWN
key to highlight a system or component, press the
OK
key to start test and
the code reader displays the message “Command Sent!”
3.
Press the
ESC
key to exit and return.
4.9 Request Vehicle Information
Vehicle Information allows to request the vehicle’s VIN number, calibration ID(s) which identifies
software version in vehicle control module(s), calibration verification numbers (CVN(s)) and
in-use performance tracking on model year 2000 and newer OBDII compliant vehicles.
CVNs are calculated values required by OBD II regulations. They are reported to check if
emission-related calibrations have been changed. Multiple CVNs may be reported for a control
module. It may take several minutes to do the CVN calculation.
