iLink Series Scan Tool User Manual V1.0
29
When logged into iScanzilla, click the 'Register Products' icon.
2. On the 'S/N Registration' tab, put a tick in the box marked '001' then enter the product's serial number
and password, and click Submit.
3. A confirmation box should be shown confirming successful registration.
Alternatively, you can register the product in the member center when logged in on our website.
6.3 Updating your tool
1. Now close the iScanzilla software, remove the TF card from your tool (making sure the tool is turned
off first!) and connect it to the PC via an TF card reader.
2. Once Windows has detected the TF card, run the iScanzilla software and login again. click the 'My
Updates' button. After a few seconds, a list of the available software updates will appear.
