background image

17

4Ch Real time/Triplex/Mux

- Stand Alone DVR

4-8. PAN/TILT/ZOOM Camera Operation

Click [PTZ] icon to control a PTZ camera. PAN/TILT is controlled by Left & Right buttons and 
Zoom In & Out is controlled by a wheel of a mouse. You can control a PTZ camera in 8 
different directions as shown below. 

4-9. Data Backup

Click [MENU] icon first.
1. Insert empty CD-R media  into CD writer and select the start time & date from which you want to 

back up.

※ The START & END time / date in HDD sub-menu only shows start and end of recording. This is 

not selectable and editable.

2. To set start time of back-up and back-up data size of CD-R media inserted, use a mouse.

※ End of back-up time will be calculated automatically as per start time & date and the back-up 

data size you set.

※ You can select the back-up data size (size of back-up data from start of back-up), but END of 

back-up time is automatically determined by DVR itself.

3. Click ‘BURN’ then it starts burning a CD.
4. When burning is completed, CD-R media will come out automatically. In the next CD back-up, 

start time of CD-R shall be the end of previous CD-back-up, and you can back-up from that 
for continuous data back-up. If you need another back-up, repeat the above procedure. 
To stop backup, click ‘ESC

.

※ While you are burning a CD, it is impossible to cancel burning process.
※ During burning process, DVR does not record.

5. You can verify the back-up CD and install the Backup CD Player on your PC to view the backup 

data.

BACK-UP

HDD

START                       2006/JUL/08 AM10:10:23
END                          2006/JUL/09 AM08:12:23

CD-R

START                       2006/JUL/08 PM12:04:12
END                          2006/JUL/08 PM08:12:23
SIZE                                        700MB -> 0MB

BURN                 ESC

BACK-UP

HDD

START                   2006/JUL/08 PM 12:04:12
END                      2006/JUL/08 PM  08:12:23

CD-R             

START                     2005/AUG/07 AM04:04:12
END                        2005/AUG/08 PM08:12:23
SIZE                                 700 MB - >  700MB

BURN          ESC

CHAP. 4   Operation

Summary of Contents for VSD-31
































Reviews: