30
4Ch Real time/Triplex/Mux
- Stand Alone DVR
5-7. FIRMWARE UPGRADE
CHAP. 5 Set up
CD-CHECK UPGRADE ESC
CURRENT VER VER 1.01.03
UPGRADE VER
FIRMWARE CD CHECK OK
MEMORY ALLOCATE OK
READ CD-R IMAGE OK
CD-R IMAGE CRC 16B1
CURRENT IMAGE CRC 503D
ERASE FLASH SECTOR OK
WRITE FLASH SECTOR OK
UPDATE IMAGE CRC 16B1
NOW POWER OFF AND POWER ON
FIRMWARE UPGRADE
You can upgrade your DVR with a firmware by using CD-RW.
Go to FIRMWARE UPGRADE menu and insert a CD containing a firmware.
First, you click
‘
CD-CHECK
’
. After finishing
‘
CD-CHECK
’
, click
‘
UPGRADE
’
. After you see a
message
‘
POWER OFF AND POWER ON
’
at the bottom, then turn off and on your DVR unit to
finish upgrading and restart the system.
USER ID ADMIN
USER PW ________
ENTER EXIT
DVR LOG-IN
System Status Messages
(1) If MEMORY STICK is not inserted :
- USB STORAGE IS CHECKING…
- USB STORAGE IS NOT AVAILABLE
- RE-CONNECT THE USB STORAGE
- CONECT THE OTHER USB STORAGE
(2) When MEMORY STICK or USB HDD is recognized
- USB STORAGE IS CHECKING …
- THERE IS A FREE SPACE ON STORAGE
- USB STORAGE IS AVAILABLE
(3) During Back-Up
- CHANGE WRITE PROTECT MODE (Only WRITE PROTECT is caught, it can be seen)
- START WRITING IN USB STORAGE
- FINISH WRITING IN USB STORAGE
(4) Error Message
- THERE IS A PROBLEM ON USB PORT (If USB PORT fails to work properly)
- USB STORAGE IS FULL (When USB is full)
- FILE SYSTEM IS NOT SUPPORTED (If File System is not supported)
- SIZE IS LARGER THAN FREE SIZE (If back-up size is larger than free space)
※
Back-Up procedure is the same as CDR Back-Up.
※
If Back-Up size is larger than 2GB, it creates several files. (It saves by 2GB).
