background image

EMEA SALES

23, avenue du Général Leclerc
92340 BOURG-LA-REINE
FRANCE
E-Mail : emeasales@rsivideotech.com

North American Headquarters

1375 Willow Lake Blvd, Suite 103
Vadnais Heights, MN 55110
USA
E-Mail : usasales@rsivideotech.com

4

www.videofied.com

UNIVERSAL DOOR CONTACT 

CT201 CT601 CT702

INSTALLATION SHEET

The EC declaration of conformity of
this product is available by flashing
that QR code :

Battery

Type C - LS14500 SAFT - Lithium battery

Nominal voltage

3 V

Low battery limit

2.7 V

Estimated battery life

Up to 4 years

Current consumption

Standby (1h average)

30 µA

Max

70 mA (with alarm and communication)

Panel compatibility

W, X and VISIO panels

ELECTRICAL PROPERTIES

RF S2View

® 

technology

Radio type

Spread spectrum RF bidirectional

Operating frequency

•  868MHz - CT201 (Europe, Africa, Asia)
•  915MHz - CT601 (Americas)
•  920MHz - CT702 (Australia, Chile, Peru, Paraguay)

Transmission security

AES algorithm encryption

Supervision

Radio, batteries, tamper

Radio antenna

Integrated

RADIO PROPERTIES

Internal detection

I.L.S with provided Alnico magnet

Axis of detection

3 axis (X, Y, Z)

Opening detection distance

2.3 cm (axis Y & Z)

1.4 cm (axis  X )

Closing detection distance

2 cm (axis Y & Z)

1.2 cm (axis  X )

External detection

Wired input

Max wire length

16m

Input type

NC or NO (recorded during detection test)

DETECTION PROPERTIES

BOX

Physical properties

Material

ABS UL94-V0

Dimensions

79.3 mm x 35 mm x 24.6 mm

Weight

32 g (without battery)

Installation / Mounting

Mounting support

Non-ferromagnetic surface (ex : wood)

Wall mounting

2 screws

Box sealing

1 screw

Environmental properties

Operating temperature

-10°/+55°C

Max relative humidity

75%, without condensing

This symbol on the product or on its packaging indicates that this product should not be treated as household waste. 
It must be handed over to the applicable collection point for the recycling of electrical and electronic equipment. 
By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the 
environment and human health. The recycling of materials will help to conserve natural resources.
For more information about recycling of this product, please contact your local municipality, your waste disposal 
service or the company that installed the product.

STANDARDS AND CERTIFICATIONS

868MHz (CT 201)

Compliant with the annex IV of the R&TTE Directive 1999/5/EC

915MHz (CT 601)

USA FCC

Part 15C

Canada IC

RSS-247 Issue 1

920MHz (CT 702)

Australia RCM

AS/NZS4268

Tamper

Tamper detection

Cover and wall tamper

Summary of Contents for CT201

Page 1: ...ake the detector to its intended mounting location and make sure that the LED flashes continuously indicating good communication with the control panel 9 Press YES OK to end the radio range test then press ESC NO 10 The display shows AREA ASSIGNMENT AREA 1 Press either arrow button repeatedly until desired AREA number appears then press YES OK 11 The display shows PERIMETER DEVICE Press YES OK or ...

Page 2: ...e wired input is used installing the magnet is not needed 1 Remove the base from the contact 2 Hold the base against the wall and mark the mounting points 3 Drill 4 Mount the base on the wall 5 If using the wired input connect 2 AWG22 wires from the wired detector to the input terminals 6 Mount the detector on its base and lock with the screw 7 Insert the magnet in its case 8 Use the plastic parts...

Page 3: ...ications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interferencetoradioortelevisionreception whichcanbedeterminedbyturningtheequipmentoffandon theuserisencouragedtotrytocorrect the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the ...

Page 4: ...istance 2 cm axis Y Z 1 2 cm axis X External detection Wired input Max wire length 16m Input type NC or NO recorded during detection test DETECTION PROPERTIES BOX Physical properties Material ABS UL94 V0 Dimensions 79 3 mm x 35 mm x 24 6 mm Weight 32 g without battery Installation Mounting Mounting support Non ferromagnetic surface ex wood Wall mounting 2 screws Box sealing 1 screw Environmental p...

Reviews: