SnapShot ANPR Bollard Camera Installation Guide
Page 8 of 12
5. Operation
To set up and test the camera operation, please proceed as follows:-
•
Connect the power and video cables and switch on the supply
•
Park a vehicle at the desired captured point
•
With a local video monitor, check the ANPR (and overview
camera, if fitted) are producing a picture
•
Using the rotary controls on the rear of the ANPR camera (see
image below), adjust the zoom and focus for the best picture
•
For Dual cameras, adjust the zoom and focus by adjustment of
the lens rings
•
If you need to pan the camera, slacken the base mounting bolts
and rotate the whole cabinet. The ANPR camera may also be
tilted on its mount to provide a small elevation adjustment
•
Ensure the cabinet door is closed and locked on completion
ANPR camera zoom & focus
