FUNCTION SETTING
FUNCTION SETUP*
How to use the Dip Switches
1.
LED Brightness Adjustment
Brightness of LED light can be controlled by 3 levels.
Factory default is "High".
2.
Menu setup push buttons
•
ENTER: Used to access the menu and confirm selection.
•
UP, DOWN: Used to move the cursor to up or down.
•
LEFT, RIGHT: Used to move the cursor to left or right and
change the value.
*Pressing 2 buttons at one time might cause an error.
In this case, exit and enter the menu again or turn off and on.
OSD MENU STRUCTURE
Function
Setting
menu
Select
menu
Sub menu
Contents
1. EXPOSURE
LENS
MANUAL
BRIGHTNESS
0~99 : Adjust brightness with a manual iris lens
E. SHUTTER
AUTO, 1/60, 1/100FLK, 1/120, 1/250, 1/500,
1/1000, 1/2000, 1/4000, 1/10000, 1/100000
: Adjust shutter speed
DC
BRIGHTNESS
0~99 : Adjust brightness with a DC iris lens
E. SHUTTER
AUTO, 1/60, 1/100FLK, 1/120, 1/250, 1/500,
1/1000, 1/2000, 1/4000, 1/10000, 1/100000
: Adjust shutter speed
AGC
OFF, LOW, MIDDLE, HIGH
You cannot use the Auto D&N change mode
when AGC is off
SENSE-UP
AUTO, OFF, X2, X4, X8, X16,
X32, X64,X128, X256, X512,
X1024
Sense-up levels for low luminance
(x2 ~ x1024)
BACKLIGHT
BLC
BLC LEVEL
OFF, LOW, MID, HIGH
TOP
0~15: Adjust top position of BLC zone
BOTTOM
1~16 : Adjust bottom position of BLC zone
LEFT
0~15: Adjust left position of BLC zone
RIGHT
1~16 : Adjust right position of BLC zone
HLC
HBLC
OFF : Deactivates HBLC function
MANUAL
HBLC LEVEL : OFF, LOW, MID, HIGH
TOP : 0~15
BOTTOM : 1~16
LEFT : 0~15
RIGHT : 1~16
MODE
ALL DAY : Activates HBLC function all day
NIGHT : Use the function at night only
HLC LEVEL
1~100 : Level adjust
MASK 1~4
ON
TOP : 0~33
BOTTOM : 1~34
LEFT : 0~44
RIGHT : 1~45
OFF : HLC MASK OFF
D-WDR
SET LEVEL
0~20 : DWDR level adjust
3D-DNR
OFF, LOW, MID, HIGH, AUTO Reduce noise in low illumination (Level
selectable)
RETURN
Go back to previous menu
2. WHITE BALANCE
AWB MODE
ATW
Color temperature 2500
0
k ~ 9500
0
k
MANUAL
M-WR
0~128 : Adjust the Red value to shift the color of
the image
M-WB
0~128 : Adjust the Blue value to shift the color of
the image
RETURN
Move back to previous menu
PUSH
Automatically set white balance for current
luminance environment
R-Y GAIN
0~255
Adjust Red tone of the image
B-Y GAIN
0~255
Adjust Blue tone of the image
RETURN
Go back to previous menu
3. DAY & NIGHT
D&N MODE
AUTO
DAY
→
NIGHT
7~30
Select brightness of illumination about
changing the day
↔
night mode by AGC
NIGHT
→
DAY
6~29
DELAY TIME
0~15 : Select the delay time
RETURN
Move back to previous menu
AUTO-CDS
A. DAY
→
NIGHT 6~36
Select brightness of illumination about
changing the day
↔
night mode by AGC
A. NIGHT
→
DAY 6~36
C. DAY
→
NIGHT 0~255 Select brightness of illumination about
changing the day
↔
night mode by CDS
C. NIGHT
→
DAY 0~255
DELAY TIME
0~15 : Select the delay time
RETURN
Go back to previous menu
COLOR
Fixed at color
B&W
Fixed at B/W
EXT
DELAY TIME
0~15 : Change the color
↔
B/W by external signal
(N/A)
RETURN
Move back to previous menu
BURST
ON, OFF
Transmit the burst signal or not in B/W mode
C_SUP
0~100
Color suppress controllable
A_SUP
0~100
Iris suppress controllable
SMART IR
ON, OFF
Decreases screen saturation of objects within a
short range
RETURN
Go back to previous menu
Function
Setting
menu
Select menu Sub menu
Contents
4. IMAGE ADJUST
MIRROR
MIRROR, OFF
Set a vertical image inversion
SHARPNESS 0~30
Sharpness adjustable
GAMMA
0.45, 0.55,
0.65
Set a gamma value
USER
GAMMA
0.20, 0.25, 0.30, 0.35, 0.40, 0.45, 0.50, 0.55,
0.60, 0.65, 0.70, 0.75, 0.80, 0.85, 0.90, 0.95,
1.00 : Gamma adjustable
RETURN
Move back to previous menu
LSC
ON
SET LEVEL
0~30 : Use the LSC and level adjustable
RETURN
Move back to previous menu
OFF
LSC OFF
RETURN
Go back to previous menu
5. MOTION
MOTION
ON, OFF
Motion detection function activate/deactivate
AREA
AREA 1~4
TOP
0~143
To create a zone for motion detection
BOTTOM
2~145
LEFT
0~190
RIGHT
2~192
RETURN
Go back to previous menu
RETURN
Go back to previous menu
SENSITIVITY 1~30
Motion detection sensitivity
DISPLAY
OFF, MESSAGE, TRACE
Select notification method of motion detection
HOLD TIME
0~15
Set the duration of alarm out
ALARM
OUTPUT
ON, OFF
Alarm ON/OFF
RETURN
Go back to previous menu
6. PRIVACY
MASK 1~8
OFF
Display each privacy mask or not
ON
DOT SEL
L_TOP, L_BOT, R_BOT, R_TOP : Determines
which of the 4 vertices of each MD area is to be
used
DOT XY
ENTER SETTING : Determines the coordinate
MOVE XY
ENTER SETTING : Move the mask
COLOR
BLACK, WHITE, … : Select mask color(8 colors)
RETURN
Go back to previous menu
RETURN
Go back to previous menu
7. SPECIAL
LANGUAGE
ENGLISH, … : Select language(9 languages)
TITLE
OFF- -ON
EDIT
Display the camera name on the screen
RESET
Camera name reset
POSITION
Camera name position
RETURN
Go back to previous menu
COMMUNICAT
ION (N/A)
OFF- -ON
ID
1~255 : Select the camera ID for RS-485
communication
BAUDRATE 2400, 4800, 9600 : Select baud rate
PROTOCOL PELCO-D : Camera protocol
RETURN
Go back to previous menu
DPC
OFF
Deactivates Defect Pixel Correction in low
illumination
AUTO
WHITE THR 0~255 : Setup the limited value of white pixel
correction
LUMA THR
0~255 : Setup the limited value of white pixel
correction
RETURN
Go back to previous menu
FACTORY SET YES, NO
Reset your camera to factory default condition
RETURN
Return to previous menu
(Communication setting is not changed)
8. EXIT
SAVE AND
EXIT
Save the value and exit menu
EXIT
Escape the menu without save
RETURN
Go back to previous menu
(Optional)
To create a zone
for HBLC
To create a zone for
HLC mask
Both switches in
the down position
Both switches in
the up position
