If you are transitioning to or from an MX-1 Color, ensure that the color for the
Source Event and the background color for the transition are the same.
If you specify a slow speed for a transition, ensure that your scenes are long
enough to complete the transition before the scene ends.
Ways to Create an MX1 Event
There are two ways to create an MX1 Event:
1. The NEW Menu
• Display the NEW menu, select MX1, then press [OK]. Edit Suite will create
an MX1 Event using the default values shown below.
002/003 FX=001 DI=>
MX1 SP=5 BG=0 BC=
2. The GPI-M Key
• Press GPI-M. An MX1 Event will be created using the field values that
were selected on the MX-1 at the time the GPI-M button was pressed.
002/003 FX=187 DI=<
MX1 SP=4 BG=6 BC=4
If the event is placed between existing scene or Source Events, those
events are used as the current and next sources for the transition. If the
MX1 Event is placed after an last scene or Source Event in the EDL, Edit
Suite will create a new Scene Event automatically. The
next
source on the
MX-1 will be the source for the new event.
If the connection between Edit Suite and the MX-1 is not active (cable
missing, MX-1 powered off, etc.) when the GPI-M key is pressed, an error
message,
Error 21. No MX-1 found
, is displayed. Press [OK] to clear the
error message, then complete the necessary connections.
