- 1 -
Package Contents
Check the following contents of your package:
PoE Switch x 1
User Guide x1
Power Cord x1
Accessories(Rack Mount Accessory Kit*2 ,Rubber Feet*4, screw*8)
If any part is lost and damaged, please contact your local agent immediately.
Introduction
8FE
（
PoE
）
+1GE+1G SFP is Gigabit uplink Switch which provides you with a high-performance, low-cost, easy-to-use,
seamless and standard upgrade to boost your old network to 1000Mbps. Increase the speed of your network server and
backbone connections, making Gigabit connection to a server or uplinking a network necessarily.
Its PoE ports can automatically detect and supply power with those IEEE 802.3af/at compliant Powered Devices (PD). The
electrical power is transmitted along with data in one single cable allowing you to expand your network where there are no
power lines or outlets, where you wish to fix devices such as AP, IP Cameras or IP Phones, etc.
Hardware Description
Front Panel
The Front Panel Consists of Ethernet Ports. The LED indicators are also located on the panel.
DIP Switch
The DIP switch located on the left panel.
Default:
the factory default mode, can normal communication between port 1~10.
VLAN:
1-8 port can be isolated each other but 1-8 port can connect to 9/10 port after open VLAN to stop broadcast storm
to increase forwarding rate of frame.
CCTV
Up to 250m PoE distance allows you to expand you network via Ethernet cable to where there is no power line or
outlet but where you want to fix device such as IP Cameras.
Note
:
After changing the mode, no power failure is required to make the corresponding configuration take effect
