Instruc
tion manual - English - EN
3
MNVKUEAW_1902_EN
Fasten the UEBP support (ULISSE EVO) to the counter-
plate using the screws and washers supplied (02),
using the 3 threaded holes (03) (Fig. 3 Fastening for
UEBP (ULISSE EVO), page 3).
Make sure the thread are free of dirt and debris.
Put some thread-locker into the holes for
screws (Loctite 243®).
Pay attention to the fixing. Tightening
torque:
10.5
Nm (±0.
2
5Nm).
03
02
Fig.
3
Fastening for UEBP (ULISSE EVO)
Fasten the UEBW support (ULISSE EVO) or NVX,
NTX unit to the counter-plate using the screws and
washers supplied (04), using the 4 threaded holes
(05) (Fig. 4 Fastening for UEBW (ULISSE EVO), page 3
and Fig. 5 Fastening for NVX, NTX, page 3).
Make sure the thread are free of dirt and debris.
Put some thread-locker into the holes for
screws (Loctite 243®).
Pay attention to the fixing. Tightening
torque:
10.5Nm (±0.25Nm)
.
05
04
Fig.
4
Fastening for UEBW (ULISSE EVO)
05
04
Fig.
5
Fastening for NVX, NTX
