M
anuel d
’instruc
tions - F
rançais - FR
3
MNVKUEAW_1902_FR
Fixez le support UEBP (ULISSE EVO) à la contre-plaque
à l’aide des vis et des rondelles fournies (02), en
utilisant les 3 trous filetés (03) (Fig. 3 Fixation pour
UEBP (ULISSE EVO), page 3).
S'assurer qu'il n'y ait pas de saleté ou de résidus dans
les taraudages.
Appliquer sur les trous des vis un produit
de freinage du filet (Loctite 243®).
Faire attention pendant la fixation.
Couple de serrage:
10.5Nm (±0.25Nm)
.
03
02
Fig.
3
Fixation pour UEBP (ULISSE EVO)
Fixez le support UEBW (ULISSE EVO) ou l'unité
NVX, NTX à la contre-plaque à l’aide des vis et des
rondelles fournies (04), en utilisant les 4 trous filetés
(05) (Fig. 4 Fixation pour UEBW (ULISSE EVO), page 3
et Fig. 5 Fixation pour NVX, NTX, page 3).
S'assurer qu'il n'y ait pas de saleté ou de résidus dans
les taraudages.
Appliquer sur les trous des vis un produit
de freinage du filet (Loctite 243®).
Faire attention pendant la fixation.
Couple de serrage:
10.5Nm (±0.25Nm)
.
05
04
Fig.
4
Fixation pour UEBW (ULISSE EVO)
05
04
Fig.
5
Fixation pour NVX, NTX